Discussion about PCB design as a general practice.

Tutorial 1 for Eagle: Schematic Design

In this first tutorial on CadSoft Eagle, I'll show you how to get the program up and running, how to navigate the interface, how to design your first schematic, and how to use DesignConnect to build a Bill-of-Materials.

Tutorial 2 for Eagle: Printed Circuit Board Layout

In this second tutorial on CadSoft Eagle, I'll show you how to turn your schematic into a board design that you can get manufactured! Specifically, I'll cover part layout, automatic and manual routing, layer and grid controls, ULPs, ground pours, net classes, and much more!

Tutorial 3 for Eagle: CAM Output and DFM

This is my third CadSoft Eagle tutorial, sponsored by element14 & cadsoft. In this tutorial, I'll show you how to prepare your finished circuit board design for manufacturing! This will involve performing DFM (Design for Manufacturability) checks, generating output Gerber files, and sending your output files to a board fabricator.